When Key Encryption With User Input is enabled on the Security page and someone tries to access the database without that passphrase, access is denied. The passphrase requirements can be set to allow the end user to only enter the passphrase during enrollment for a one- time prompt by enabling Allow Remember Authentication.
Important: If you enable Allow Remember Authentication, this stores the user key on the device but renders the sensitive data vulnerable to unauthorized access. Enable this only Input when required. Allow Remember Enable to save the user-derived key on the device so it does not need to be entered Authentication each time. If you do not already have one, you can generate a new one on this page.
If you do have one, you can upload it here. These are required for sending push notifications to apps, and in most cases these are settings you should not alter unless instructed. Enroll in This setting is only available in the AirWatch Agent v4.
Agent Background This setting tells the AirWatch Agent the maximum allowed time interval to refresh app content. Some App Refresh applications run for a brief period before reaching a suspended state. Background App Refresh is a feature in iOS where the application itself wakes from this suspended state.
The frequency at which the Agent refreshes is controlled by the OS and only completed during efficient times, such as when the device is plugged into a power source, frequency of use, or connected to Wi-Fi.
Minimum Select the minimum amount of time that must pass before the device attempts to refresh app content.
Detect This setting enables the AirWatch Agent to listen to iBeacon information in regions where the device is iBeacon located. Usage Self Service Setting Self Service This setting allows users to view their user account status, device compliance status, and assigned Enabled compliance policies from within the AirWatch Agent.
If enabled, users can see if their devices are compliant. SDK profiles can be used Legacy to enforce geofencing, create custom branding for the Agent and more. SDK profiles can be used to enforce geofencing, create custom branding for the Agent and more. By default, the application type is set as System.
Application Select an internal application from the drop-down menu. Only internal applications with APNs certificates that were uploaded at the time the application was uploaded to the Console are seen here. Bundle ID This field is populated based on the selections above.
This Bundle ID matches the application bundle ID that has been uploaded internally or selected from the drop-down menu. Setting Description Apply Default Settings Select which ownership types you want each of the default managed settings below to apply To to. Voice Roaming Select the checkbox to allow voice roaming. Data Roaming Select the checkbox to allow data roaming. Personal Hotspot Select the checkbox to allow personal hotspot functionality.
Activation Lock Select the checkbox to allow activation lock functionality. Setting Description Apply Default Settings To Select the ownership type s to which the following default managed settings are applied. Lock Screen Image Upload a lock screen image that displays when an end user locks their device. Home Screen Image Upload the home screen image that displays on the device. Organization Information Send notifications or other MDM prompts with customized organization information.
Setting Description Organization Name Enter the name of the organization. Organization Phone Number Enter the organization phone number. Organization Email Enter the organization email address.
Only change this if needed. If the file path is incorrectly defined, end users cannot download the Agent post-enrollment. Download Mac Agent Post Enrollment Select this checkbox to allow the agent to be downloaded post- enrollment by side-loading or from a web browser. Use these settings to determine how often to collect data from devices, to allow passcode enforcement through Agent message prompts, to allow AirWatch Cloud Messaging so that devices receive push notifications and information about updates when available, and to choose how and when to allow updates.
Setting Description General Check-in Enter the time interval for device check-in. Interval Data Sample Enter the time interval for sample data to be collected prior to transmission. Interval Administrative Enter a passcode to be applied to the app that the end user must enter to access Agent settings.
If Collect Location Data is enabled, the end user receives a prompt to enable location services for AirWatchid. The alert persists until the user enables location services. Password Enforcement Enforce Select this check box to enforce passcode policy adherence on the device. Agent Updates Enable Select this check box to enable automatic updates to the AirWatch Agent when a new version is Automatic available.
Updates Upgrade Select this check box to run silent updates without interruption. If this check box is not selected, users Silently will receive a prompt to begin the upgrade process. Remote Management Seek Enable Seek Permission if you want to prompt the end user to accept or decline the remote Permission management request from the admin. When you enable this setting, more options appear. Enable Software Management.
At this point, make sure that you verify if the File Storage is enabled. If there is no file storage enabled, you are requested to enable it. GSX Password Enter the account password. Sold-to Account Enter the digit service account number. This account number can be found in the GSX portal at Number the bottom of the web page. Time Zone Use the drop-down menu to select the appropriate time zone.
Language Use the drop-down menu to choose a language. Setting Description Enable Select this check box to display the staging settings you can configure. Automated Enrollment Platform Select which Apple platform this profile will be used for. Setting Description Staging Select the appropriate Staging Mode depending on how the device is going to be used and how the Mode device must enroll. You can choose to pre-register devices and enroll using Apple Configurator. By pre- registering devices and selecting the None or Single User mode, you can pre-assign the end user for each device.
However, you cannot pre-register Multi User devices. For non-registered devices, all devices will be enrolled under the Default Enrollment User. In this case, only non-staging users are available as default staging user options. Important: If you do not pre-register your devices and select None and specify a default enrollment user, then all devices that receive the. To ensure devices are enrolled to distinct users, pre-register them to specific users or create a staging user account and select Single User as your Staging Mode.
Only staging users are available as Default Enrollment User options. When end users open the AirWatch Agent, they must enter credentials to fully enroll the staged device. At that time, the device details will update in the UEM console and the device is associated with that end user. This stages the device for multiple, known or unknown users. When end users open the AirWatch Agent, they must enter credentials to check out the device for use. Staging User. List Sample Profile List Enter the frequency by which the profile list is refreshed on the server.
Sample Provisioning Enter the frequency by which the provisioning profile list is refreshed on the server. Information Sample Managed Enter the frequency by which the managed app list is refreshed on the server.
This requires the AirWatch Agent v4. DEP settings can be configured at any Organization Group. A wizard displays when you initially configure the DEP Profile, which walks you through the setup process. The specific steps are not mentioned here because they are included as part of a separate guide. You can optionally select to sign and encrypt profiles here. You can configure these settings during your initial set-up.
Prompt devices to update This is a legacy setting used to provide compatibility with iOS 5. The SSL certificate should be the same one used on the device services end point.
Setting Description Use in Select this checkbox to retrieve a SCEP certificate during enrollment instead of a regular enrollment Enrollment certificate. Installing specific fonts allows users to view and read text that is not supported by standard means. Compatible font file types include. There is no limit to the number of fonts you are can install on devices and you can remove a font at any time.
Drag a supported font file type. Setting General Enable Select Enable to turn education functionality on. Source Note that changing sources and saving the configuration will delete all existing classes.
Set Specify the maximum number of users each device's memory can support. This value divides the local Maximum storage on the iPad evenly for that number of users. If the number of users exceeds this setting, additional Resident users' information is stored on iCloud instead of on the device. Password Specify the password for the user account. Data Sample Interval Enter the time interval by which the Agent will collect data from the device. Administrative Passcode Enter the passcode that is required to access the Agent settings on the device.
Override only means. Activation Enter the number of hours in the Activation Code Expiration field for the amount of time the end Code user has to activate their BES 10 server.
Data Sample Interval Set the time in minutes the agent waits to collect data from the device. Profile Refresh Set the frequency in minutes the profile list of each device will be refreshed on the server. This entry is typically 0. Data Sample Interval min Set the time in minutes the agent waits to collect data from the device.
Setting Description Applications Poll Interval min Set the time in minutes the agent waits to check for new applications. Setting Description Certificates Poll Interval min Set the time in minutes the agent waits to check for new certificates.
Setting Description Mode Select the Mode to define how the remote management applet and the device communicate over the network: l Off — Communication happens directly between the applet and the device.
This mode is used when the computer that has the applet and the device you want to remotely manage are on the same network or virtual network. There is no direct connection available between the applet and the device. The applet and the device both proactively establish connections with the tunnel server.
Use this when the device and the tunnel server are on different networks and the device can connect to the tunnel server on a public IP, for instance a device out in the field and the applet and tunnel located in a central location.
Enable Enable to encrypt the data sent during remote management with AES bit encryption. Encryption Passphrase Enter a passphrase used for authentication between the applet and the AirWatch Agent. Port This port is responsible for catching the different frames on the device for use with screen sharing. The default port is and should not be changed unless port is in use for other uses in your organization.
Device Log Set the level of verbosity for the device logs when using the remote control application. Level Log Folder Enter the folder path for storing the device log. Path Max Enter the maximum number of sessions allowed through remote management. Number of The number of retries allowed before communication attempts stop. This setting is Retries available when WebSocket is selected as the Mode. Retry The amount of time between attempts to communicate.
This setting is available when Frequency WebSocket is selected as the Mode. Seconds Heart Beat The amount of time in seconds that passes between status updates are sent from the Interval device. This setting is available when WebSocket is selected as the Mode. Seconds Connection The amount of time in seconds that passes between attempts to reestablish Loss Retry connection.
Frequency Seconds. Setting Description Data Sample Enter the data sample time interval, which is how frequently the Agent collects data from the device. Interval min Data Transmit Enter the data transmit time interval, which is how frequently the Agent sends data to the AirWatch Interval min server. Data Sample Interval Enter the time interval in minutes at which the agent will collect a data sample from the min device.
Data Transmit Interval Enter the time interval in minutes at which the agent will transmit the collected data min sample to the console. Windows Auto-Discovery is a service that allows users to enroll using only their email address and removes the need for end users to enter in a server address and a group identifier.
Disable this option to use custom cabs you upload. Add Select to upload a custom cab file to push to Windows Rugged devices. Application l Platform — Choose the cab file's specific OS. This option allows you to upload different cabs for different operating systems that your Windows Rugged devices use. WM Select the custom cab you want to push to devices running Windows Mobile. Interval min Data Sample Set the time in minutes the agent waits to collect data from the device.
Interval min Data Set the time in minutes the agent waits to send data collected from the device to the UEM console. This helps reduce bandwidth issues as devices typically Event meet the condition when they are stored for after hours.
Setting Description Enable Shared Select this check box to enable shared device functionality. Setting Description Enable Agent Installation Complete Select this check box to enable or disable notifications for Agent installation Notification completion. Enable Product Install Status Select this check box to enable or disable notifications through the Agent for Notification product installation completion.
Setting Description Collect Enable to allow the agent to determine the device location based on a device's Wi-Fi network. Setting Description Proxy Configuration Enable to allow the configuration of a proxy settings. Application Manager Select the hour the product begins to push to devices. Setting Description Randomization Window Select the amount of time the product is pushed over. The order of devices is min randomized. Seconds Connection Loss Enter the amount of time in seconds that passes between attempts to reestablish the Retry Frequency connection.
Settings Descriptions Job Log Select the level of detail your job logs contain. You can choose between the following options. Level Error — The log contains errors only. This setting produces the smallest amount of detail. Warning — The log contains errors and all warnings. Information — The log contains all errors, all warnings, and all supplemental information. Verbose — The log contains all of the above plus the entire ledger of exchanges between the device and the server, no matter how trivial.
Select this option for troubleshooting purposes. This option produces the largest log. Settings Descriptions Retain Agent Executables After Enable to keep the agent executable files after an enterprise wipe command is Enterprise Wipe issued to the device. Setting Description Force Password Enable this setting to force the password to expire so that the user must change the Expiration password.
View Power On Enable this setting to allow the user to see the password that they enter. You can set which metrics to collect MotoDC below the download link. Interval min Profile Refresh Set the frequency in minutes the profile list of each device refreshes on the server. Interval min Enable Enable the use of a passcode to access the agent settings on the device. Passcode Administrative Enter the administrative passcode to enter for access to agent settings on the device.
Passcode Collect Enable to collect the location data from the device. The location is determined based on the Wi-Fi Location Data network of the device. When located data is available, the agent sends the location data to the console at the Transmit Interval. Interval min. Notification Services. Important: This token expires annually.
If the token is expired and still enabled, you cannot enroll into this organization group. Company Hub requires the use of Enterprise Application Tokens. Server This option requires a server running Windows Server or newer. Enabling this option displays the Server URL field. Secure Boot Enable to flag compromised device status when Secure Boot is disabled on the device. Disabled Secure Boot forces the system to boot to a factory trusted state. When Secure Boot is enabled, the core components used to boot the machine must have the correct cryptographic signatures that the OEM trusts.
The UEFI firmware verifies the trust before it allows the machine to start. Secure boot prevents the startup if any it detects any tampered files. Attestation Enable to flag compromised device status when the AIK is not present on the device. It can be trusted more than a device that does not have an EK certificate. The policy prevents running code from data pages such as the default heap, stacks, and DEP Policy memory pools.
DEP is enforced by both hardware and software. Disabled BitLocker Enable to flag compromised device status when BitLocker encryption is disabled on the device. Disabled Code Enable to flag compromised device status when the code integrity check is disabled on the device. Integrity Code integrity is a feature that validates the integrity of a driver or system file each time it is loaded into Check memory. Code integrity checks for unsigned drivers or system files before they load into the kernel.
The Disabled check also scans for users with administrative privileges running system files modified by malicious software. Early Launch Enable to flag compromised device status when the early launch anti-malware is disabled on the device.
Anti- Early launch anti-malware ELAM provides protection for the computers in your network when they Malware start up and before third-party drivers initialize. Disabled Code Enable to flag compromised device status when the code integrity version check fails. Integrity Version Check. Settings Descriptions Boot Enable to flag compromised device status when the boot manager version check fails. Manager Version Check Boot App Enable to flag compromised device status when the boot app security version number does not meet Security the entered number.
Version Number Check Boot Enable to flag compromised device status when the boot manager security version number does not Manager meet the entered number. If the hash is Integrity not a whitelisted value, health attestation compliance fails.
If the hash Config Policy is not a whitelisted value, health attestation compliance fails. This measurement checks the BIOS trusted code to ensure that it has not been compromised.
If the measurement is not a whitelisted value, health attestation compliance fails. Data Sample Interval min Enter the time interval in minutes at which the agent will collect a data sample from the device.
This settings also controls how often the AirWatch Agent checks for a new automatic upgrade if enabled. Enforce Passcode Profile Enable to force the agent to prompt end users for password changes when a passcode profile is installed or updated.
This option does not apply to domain-joined devices. Setting Description Seek Permission Enable Seek Permission if you want to prompt the end user to accept or decline the remote management request from the admin. Interval min Administrative Sets the passcode to access administrative settings on the device.
Inherit means use the settings of the current organization group's parent OG, while Override enables the settings for editing so you can modify the. Settings Descriptions Code Enable to flag compromised device status when the code integrity version check fails. Integrity Version Check Boot Enable to flag compromised device status when the boot manager version check fails. The information displayed is used in the creation. When you visit the page for the first time, a staging user is created that the information applies to.
The following settings display after you select Add Printer Server. This key will need to be entered into the relevant Print Server configuration file. User Id Select the appropriate enrollment user that will be associated to the Print Server. Service Uid Enter the ID of the print server which identifies it uniquely.
Setting Description Device Details Sample Enter the time range days or hours to collect peripheral device detail samples. Days range from 1 to 48 and hours range from 1 to Next to each action, enter the maximum number of allowable device changes that you want to occur at once using bulk management. Setting Description Query Enter the maximum number of device queries you can run in a bulk command. Send Message Enter the maximum number of devices that can receive a bulk message.
Setting Description Enterprise Wipe Enter the maximum number of devices you may wipe in a bulk command. Enterprise Reset Enter the maximum number of devices you may invoke an enterprise reset in a bulk command.
Device Wipe Enter the maximum number of devices you may wipe in a bulk command. Lock Device Enter the maximum number of devices you may lock in a bulk command. Change Enter the maximum number of devices for which you may change the organization group in a Organization Group bulk command.
Change Ownership Enter the maximum number of ownership changes you may invoke upon devices as part of a bulk command. Warm Boot Enter the maximum number of devices you may invoke a warm boot operation in a bulk command. Provision Now Enter the maximum number of devices you may concurrently provision as part of a bulk command. Shutdown and Enter the maximum number of devices upon which you may invoke a shutdown and reboot Reboot bulk command.
Add Tag Enter the maximum number of devices to which you are able to add a bulk tag. Enable Lost Mode Enter the maximum number of devices for which you may enable lost mode in a bulk command. Disable Lost Mode Enter the maximum number of devices for which you may disable lost mode in a bulk command. Custom Command Enter the maximum number of devices upon which you may invoke a custom bulk command. If you are using up-to-date versions of the Agent this setting page does not apply to you.
You should not modify the settings on this page unless you know what they do and have talked to Workspace ONE UEM about modifying them. Group l Device Group — Required field used to label the device group. A geofence limits the use of the device to specific areas including corporate offices, school buildings, and retail department stores.
You can think of a Geofence as a virtual perimeter for a real-world geographic area. For example, a Geofence with a 1-mile radius may apply to your office, while a much larger Geofence may apply approximately to an entire state.
Tags allow you to easily identify a specific device without requiring a device profile, smart group or compliance policy and without requiring the creation of a note. In the current version of Workspace ONE UEM, this functionality is much better served by making use of child organization groups and user groups.
For Windows Rugged devices only, User Categories are the way to establish multi-user device staging. In such a case, you would create a User Category for each user that needs to share a single Windows Rugged device. You would then associate the Windows Rugged Launcher with the established User Categories, thereby effectively implementing multi- user device staging. Select the Add button to create a user category and complete the following options.
Setting Description Name Required field used to label the user category. Description Enter a description of the user category's purpose. The User Migration tool provides an easy way to check existing Basic Users against current directory users and consolidate information throughout. Additionally, customers using Auth Proxy or legacy SAML who want to start utilizing user groups may employ the User Migration feature to update their users.
Setting Description Wiped Enter the number of Wiped Devices that acts as your threshold for triggering wipe protection. Devices Within Enter the value for Within minutes which is the amount of time the wipes must occur in order to trigger minutes wipe protection. Email Select a message template to email to administrators. You can use the following lookup values as part of your message template. To Enter the email addresses of administrators who should receive this notification message.
You should only notify administrators who have access to the Wipe Log page. Setting Description Allow Enable the enterprise wiping of unmanaged devices. The default setting is enabled. Enterprise Wipes. The Interactive settings means the only way a profile can be installed on a device is if the user logs in to the Self-Service Portal and initiates the installation.
Choose App Scan Select the applicable third-party vendor. Sync Saves configurations and begins a manual sync with the App Scan Vendor without waiting for the scheduler Now task to run.
Send Email To Enter email addresses to receive notifications about new app groups created by analysis. Use a comma to separate addresses. Message Use Message Preview to see the email that the system sends upon the creation of new app groups Template using the Vendor Application Group Creation Notification template.
Pradeo Password Enter the password for the username to authenticate to your Pradeo. Appthority Password Enter the password for the username to authenticate to your Appthority. Options are Standard, Government, and Custom. It follows the reverse DNS format. Use Legacy Enable to configure settings and policies for legacy browsers only. Disable Printing Legacy Browsers only Enable this option to prevent printing from device.
Clear Cookies Enable to clear cookies when the app fully closes. Enable cookie encryption to add a further layer of security. Clear Cookies Enable to clear cookies and history if the Browser is idle for x minutes. History Remember Select the length of time you want the app to remember history to from the drop-down menu. History From Caching Enable to enhance web performance and reduce perceived lag time. Disable to protect browsing data on compromised devices.
Allow Disable if navigating to untrusted sites is a security concern for your organization. Connection to Enable to give end users maximum navigation flexibility and ease of use. Untrusted Sites Sync User Enable this to sync bookmarks across various devices of the same user.
Select Desktop to set desktop as the default view Mode mode. When selected, the VMware Browser renders the web pages in desktop mode if the websites supports the mode. Kiosk Mode removes the navigation bar and limits browsing to the homepage and its available links. Return Home Direct the browser back to the home page after a period of Inactivity min. The values can be After Inactivity greater than or equal to 0. Clear Cookies Prevent users from accessing the previous user's secure information after they finish using the and History Browser.
Leave this field blank to display a 'Recently Visited' page by default. The browser filters by domain only, not by. Include the scheme to limit testing to the specified scheme. Allow Select to whitelist IP addresses for browsing. Terms of Use Required Terms Select the appropriate agreement from the drop-down menu.
This agreement applies to all Workspace ONE UEM internal applications, and eliminates the need for end users to accept the same agreement multiple times, across apps. Bookmarks in Browser Name Provide text in this field to display as the friendly name. Leave this field blank to display the URL as the bookmark name. Add Bookmark Select to add additional bookmarks. Notification Do not configure any settings on this tab unless you have been provided with specific instructions on how to complete the fields from Workspace ONE UEM.
Setting Description Require Require users to log in with their username and password before they can access the app catalog. Reauthenticate Select a reauthentication option. Users still have to reauthenticate if they clear cookies on their devices, even with this option enabled.
Setting Description Catalog Enter a name for your app catalog. This title appears on the home screen of the device.
Title Platforms Select the supported platforms for your app catalog. If this is enabled for the platform, the profile gets pushed to the device. Apple iOS offers the option to open the app catalog web clip in full screen mode, if desired.
Icon Upload an icon for your app catalog. This icon appears on the home screen of the device. Setting Description Branding Upload a logo to brand the app catalog for your organization. Default Sets the app catalog to open with this filter enabled on the catalog's main page.
However, if users need to Filter install featured applications, the app catalog defaults to open with the Featured filter. Users can change the default filter at any time and their selection stays active if they use the app catalog within a 24 hour period.
After more than 24 hours of inactivity, the app catalog returns to the set default filter. Default Sets the app catalog to open with a configured sorting option enabled. Sort Users can change the default sort at any time and their selection stays active and does not depend on activity.
Pinned Pins specific categories to the default menu. Categories Users can elect to see more categories. Many organizations do not need to manage devices for their mobile fleets for various reasons, including possible privacy or legal issues.
This catalog distributes all application types, public, purchased, internal, and web. Registration Enable Select the Enable Email Domain Validation option to use specified email domains to validate users Email when they register to access to the Standalone Catalog. Catalog Enter a title in the Catalog Title field. Setting Description Restricted Enable this setting to restrict devices to only install assigned public apps from the iTunes App Store. Mode for This setting will send a restriction profile that blocks iTunes App Store access on iOS devices in the Public iOS organization group so you do not have to configure any additional restriction profiles to block app Applications store access.
You can create, view, edit, delete, and assign one or more categories for both public and internal applications and books in a selected organization group. The App and Book Catalogs display these categories, allowing end users to browse and filter.
Host internal applications on your network with an external application repository and manage the applications with the Workspace ONE UEM.
Setting Description Username Enter the username for the external app repository. That is your infrastructure setup. Now you simply need to create an image, and deploy that image with a pool, and grant a user entitlement to that pool. Just remember to make sure you put your image in Audit mode, and always install an agent that is the same version as the connection server, and get the latest version of VMWare Tools on there as well!
Your email address will not be published. Submit a Comment Cancel reply Your email address will not be published. Search for:. I don't know what to do at this point but to restart the system. Please help, any suggestions?
Thanks in advance. WAGN and static ip - wireless and wired clients cannot connect to the internet. Our Department is assigned only a what IP static of our server, as well as a pc can connect to the server and the internet. Connected clients receive an ip address from the DHCP How can I configure my router to allow clients to connect? This means that What makes this configuration completely cannot be routed. The alternative would be to use the WAG as a point of easy access only, and not as a router.
However, due to the Of course, this does not affect the wireless or wireline customers connected to the WAG My computer cannot connect to the internet, the signal is excellent in the modem, but the computer does not recognize that there is a link.
What could be wrong? Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
I'm so basic in my problem as I feel stupid, but I get the message that the router cannot connect to the Internet. Why the hell not? So why don't the router sees it? The last time I have tried again, start over from scratch, he kept do and re-do "check your computer's connections" and then ask me again my password of. I didn't know if he wanted the original preset 'admin' or that I had sometimes back hours came the first time that this has been asked.
So I tried both. Finally he moved reset the password or something, and I finally return to the "the router cannot connect to the Internet. Power, then turn on the DSL Modem. And again I say, this direct DSL connection of the modem for my laptop is fine. But when the cable Internet through the router, then the other wire goes to my laptop, no Internet. All the time my DSL modem displays a green light for the Internet.
And the router shows a light on the Internet. I'm too tired to walk any further tonight. Maybe someone has a simple suggestion. I'll check tomorrow. Connect the modem to the Internet port and the computer and port Ethernet 1 of the router. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 30 seconds. Power cycle the router and reconfigure. Hi, my laptop have this problem cannot connect to the internet, but the bar shows that I am connected to the network, but without access to the internet.
I tried someone's guide to uninstall the network adapter in Device Manager and then reinstall it again, but now I'm stuck with the laptop cannot even detect the wireless network and the " Qualcomm Atheros ARWB-EG Wireless Network Adapter ' on Device Manager displays this message" the device is not working properly because Windows cannot load the drivers required for this device.
Code 31 ". I had mcafee antivirus 3 weeks around which has already expired for about 50 days and I uninstalled to turn into kaspersky anti-virus. I had Acrobat Pro 8. It is a registered product. However, given that I have updated to Windows 10, he repeats that it cannot connect to the internet to register or update the product. I am connected to the Internet.
What should I do? Have been sick and now I'm back on my machine. Please can tell me how to find out what it is? Cannot see wireless networks. Hello I have checked through some of the forums, but couldn't find an answer that helps me, so I post here. Until this morning, my wireless worked fine.
Today, my laptop is unable to connect to any wireless networ.
0コメント